Poly Liquid

Polyester resin for body repair

Pre-accelerated two-component Polyester Resin, to be used in combination with fibre glass tissue for the repair of holes, gaps and cracks in metal, timber and polyester surfaces. Available in 1 kg metal container.

Open technical data sheet

Shown product

Poly Liquid 1kg

Featured properties

Two component polyester resin
Used in conjunction with Fibreglass Matt
Long lasting adhesion
Very easy to apply
Fast curing
Very strong repairs

Assets

Main image

Technical data sheet

TDS Soudal, Poly Liquid, English

Applications

Filling of scratches, tears, dents in metal plates, including zinc and galvanised steel. Repairing scratches, cracks, small holes and dents on a car. Repairs of metal, polyester and wooden surfaces. Repairing of small holes and dents in car body parts. Replacing or reinforcing of rusted through parts.

Instructions

When used together with Fiberglass Mat, cut the fiberglass to the right size with on all sides + 3 cm overlap. Fray out the overlapping edges to achieve a smooth transition. Mix the required amount of Poly Liquid with 2 to 4% hardener in the supplied cup until a homogeneous mixture without color differences is obtained. Transfer by means of the brush a portion of the mixture to the substrate. Soak the fiberglass mat and press it firmly against the surface. After drying of the preceding layer repeat this operation in order to obtain a greater stiffness. Make sure that the successive mats are 1cm larger each time. Sand after hardening with a very coarse sandpaper or a grinding wheel. Additionally apply a thin layer of Metal Plastic for a good finish.