Soudafoam FR HY GG

Fire resistant hand held PU foam

HIGH YIELD fire rated, one component expanding polyurethane foam filler. 25% more yield than standard Soudafoam FR fire resisting foam. Rapid curing. Excellent thermal and acoustic insulation properties. Expands 35-40 times its initial volume. Excellent primerless adhesion on most construction materials. Conforms to all international standards.

Open technical data sheet

Shown product

Soudafoam FR HY GG 600ml

Featured properties

Fire rated polyurethane expanding foam filler
EN13501-2 – Reaction to fire, class E
EN1366-4 – Fire resistance, up to 4 hours depending on joint configuration
More than 25% linear yield than Soudafoam FR

Assets

Main image

Technical data sheet

TDS Soudal, Soudafoam FR HY GG, English

Test report

Warrrington Test report WF 529939, Soudal, Soudafoam FR HY GG, English

Test report

Warrrington Test report WF 532889, Soudal, Soudafoam FR HY GG, English

Applications

For use in passive fire protection systems as a large gap filler; installation of fire retardant window and door frames; sealing of expansion and connection joints, penetration seals.

Instructions

Shake the aerosol can for at least 20 seconds.
Open the cover and fold the tube horizontally.
Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to
application. For non-conventional substrates a
preliminary adhesion test is recommended. Fill
holes and cavities for 1/3, as the foam will
expand. Repeat shaking regularly during
application. If you have to work in layers repeat
moistening after each layer. Fresh foam can be
removed using Soudal Gun & Foamcleaner or
acetone. Prior to using the Gun & Foamcleaner, test whether surfaces are affected or not. Especially plastics and lacquer or paint layers can be sensitive to this. Cured foam can only be removed mechanically or with Soudal PU-Remover. For storage: detach the bung, close nozzle with
bung, close the cap and store can upright.