Soudagum Hydro Kit
Add to quick accessCoating
The Soudagum Hydro kit, contains two foil bags of 500g Soudagum Hydro, application brush, small reinforcing non-woven fleece (15cm x 30cm) and a pair of disposable gloves. The solvent-free protective waterproof coating is suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks. Soudatextile should be applied between two layers of the liquid coating.
Featured properties
- Ready to use, single-component waterproof coating
- Solvent and Isocyanate free
- Excellent workability, can be applied in 2 layers
- Rain resistant 2 hours after application
- Excellent ahesion on most common substrates
- Good weather resistance
- Limited UV resistance
- Paintable
Assets
TDS Soudal, Soudagum Hydro Kit, English
Applications
- Sealing of skylights, dome lights, pipe collars, wall breakthroughs, …
- Sealing of cracks in roofs and walls
- Sealing of indoor and outdoor joints
- Short term repairs of metal and plastic roof gutters and drainage
- Short term repair and renovation of rooftops (pans, slats, zinc), roof edges and chimney flashings
- For protection and renovation of wood constructions such as verandas, terraces, garden poles, underground garden wood…
- Sealing of flower boxes and the outside of fountains and water ornaments
- Not recommended for applications which are permanently immersed in water
Example of Applications
Instructions
- Surfaces must be free of dust and grease. Remove all traces of loose existing coating material. Stir Soudagum Hydro in the container before using. Apply by roller or brush in 2 layers to a thickness of 2mm. The second layer cannot be applied until the first has dried completely. The membrane can be reinforced with a non-woven fleece (Soudatextile). If so, it’s recommended to be used between two coats. The fleece should be submerged into the first coat while it is still wet.