SMX Parquet Adhesive

Hybrid polymer timber flooring adhesive

Soudal Universal Parquet Floor Adhesive is a universally applicable water-free polymer for gluing multi-layered and solid parquet floor with tongue and groove. Also suitable for gluing exotic woods.

Shown product

SMX Parquet Adhesive 1kg

Applications

Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard), including floors with underfloor heating and cooling.

Featured properties

Elastic
EC-1R PLUS label: very low emission
Ready to use, single component
Solvent free
Contains no water
Free of isocyanates
Easy to apply
Forms stable peaks once applied by a notched trowel or spreader comb
Rapid cure and build up of final bond strength
High final bond strength (according to EN14293)
Suitable for underfloor heating
Avoids staining of the hands

Assets

Main image

Technical data sheet

TDS Soudal, SMX Parquet Adhesive, English

Instructions

Adhesive should be acclimatised to room temperature before installation. Apply the adhesive to the surface by means of notched Soudal trowel N°11. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength. Wait at least 24 h before sanding and finishing the parquet.