Soudabond FS Spray

Contact adhesive

Soudabond 370 Fine Spray is a ready-to-use, universal contact adhesive based on synthetic rubbers. It is applied two-sided and carried in a canister for immediate spraying without extra spray installation.

Shown product

Soudabond FS Spray Transparent 22,1l

Featured properties

Fast drying process
Fast strength build-up
Immediately fixed
Moisture resistant
Chemical resistant against light acids and bases
Doesn't contain toluene- and methylene chloride
Wide application area
Good adhesion to many materials
Ready to use and very user friendly
Efficient spraying - no loss of product
Portable, no electricity or compressed air needed
maintenance-free

Assets

Main image

Applications

Fast drying process
Fast strength build-up
Immediately fixed
Moisture resistant
Chemical resistant against light acids and bases
Doesn't contain toluene- and methylene chloride
Wide application area
Good adhesion to many materials
Ready to use and very user friendly
Efficient spraying - no loss of product
Portable, no electricity or compressed air needed
maintenance-free

Instructions

Adjust the desirable spray pattern by choosing the correct nozzle and adjusting the ErgoGrip gun. Apply the adhesive two-sided with the ErgoGrip gun. Make sure the adhesive is nebulized equally. At least 80% should be covered. For strong porous materials (plaster, concrete, …) a second layer can be applied after the first layer (wait for +/- 15 to 20 min). About 1-2 min, depending on the circumstances, let it dry and close maximum 30 min after applying. Immediate adhesion. Then, press well with a pressure roller, in a press during 15s or bat down with a rubber hammer. After usage, immediately close the ErgoGrip gun.